Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

godrej | air-conditioner – AC Not Turning On or Not Cooling Properly
Error Codes (undefined): Troubleshooting, Fixes & Prevention Tips explained below.

What Does “No Power / Not Cooling” Mean?❓

When your air conditioner doesn’t power on or is running but not cooling, it means the electrical supply or cooling system may be affected. It could be as simple as a tripped breaker or dirty filters, or more complex like compressor failure. This issue prevents proper operation and needs immediate attention.

air-conditioner - Possible Causes of No Power or Cooling

  • Loose or damaged power cable
  • Remote control not working
  • Tripped circuit breaker
  • Dirty air filters blocking airflow
  • Low gas or refrigerant levels
  • Compressor failure or capacitor issues

air-conditioner - Fix Steps – What to Do If AC Has No Power or Cooling❓

  • Check Power Supply

    1. Make sure the plug is connected properly
    2. Check if the circuit breaker has tripped

  • Inspect Remote and Batteries

    1. Replace remote batteries
    2. Try using the power button on the unit directly

  • Clean Filters

    1. Open the front panel and remove the filters
    2. Clean with water and dry before replacing

  • Check Temperature Setting

    1. Ensure the temperature is set lower than room temperature
    2. Use cooling mode instead of fan mode

  • Call a Technician

    1. If there is still no cooling or power, call a professional to check the compressor or PCB board

air-conditioner - Helpful Tips – Prevent No Cooling or Power Issues

  • Ensure your remote has working batteries
  • Use a voltage stabilizer in areas with power fluctuations
  • Clean filters every 2–4 weeks
  • Schedule an annual AC check-up
  • Avoid setting the temperature too low during very hot days

Common Questions❓

Question: Why is my AC not turning on even after resetting?
Answer: It could be a power issue, faulty remote, or internal PCB board problem.
Question: Can dirty filters stop my AC from cooling?
Answer: Yes. Blocked filters reduce airflow and cooling efficiency.
Question: Is it safe to keep turning the AC on and off?
Answer: Frequent switching can damage components. Wait a few minutes before restarting.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!